Table of Contents
Advertisement
Figure 4-58 Upload calibration coefficients
Click OK to upload the coefficients to receiving cards.
4.11.2 Edit Calibration Coefficients
Prerequisites
Calibration coefficients are available.
Cabinet configuration is done and the cabinets stay online.
Operating Procedure
In the device list on the left, select the desired controller.
From the menu bar, choose Tools > Coefficient Management.
In the Select Mode area, select Pixel.
Figure 4-59 Select mode
In the topology, click to select a cabinet.
In the displayed window, select the target pixels and enter the parameters in the Coefficient Management area to
adjust the proportion relationship of the red components, green components and blue components in RGB
The calibration coefficients of the selected pixels will be overridden and changed to the values you set。
www.novastar.tech
MX6000 LED Display Controller User Manual
.
42
Advertisement
Table of Contents
