Apply Presets; Manage Presets - NovaStar MX6000 Pro User Manual

Figure 4-51 Preset management
Click the icon of a preset.
In the properties area, set a name for the preset and select the screen and data you need to save.
If the preset you selected is not empty, the original data will be overwritten.
Click Save.

4.9.2 Apply Presets

Apply a saved preset to quickly complete settings of the parameters on the Source, Layout, Processing and
Screen Settings pages.
Notice
The preset of a specific device can only be applied by this device itself and the preset of a group can be applied by all
the devices in the group.
Operating Procedure
Select the controller from the device list and then select Preset.
On the preset management page, double-click a preset and wait it to finish loading.
The preset that is being used has a
Figure 4-52 Apply presets

4.9.3 Manage Presets

Select the controller from the device list and then select Preset and do the following operations as needed.
Modify a Preset
Select a preset. In the properties area, change the related information and click Save.
www.novastar.tech
at the top right.
MX6000 LED Display Controller User Manual
37