Table of Contents
Advertisement
Note
All cards must be updated at the same time.
During the upgrade process, the controller will automatically restart. In addition, please do not close VMP or
switch to another controller until the upgrade is complete.
Restart the controller
Click Restart and click OK.
Reset settings (operate with caution)
Click Reset and click OK.
4.12.2 Maintain Cabinets
Related Information
For the cabinet painter operation, the configuration parameters of the cabinet to be copied can be saved to local
computer as an .rpkg file for future use.
Operating Procedure
From the menu bar, choose Tools > Maintain and select the Cabinet tab. In the device list, select the target
controllers and perform the following operations on the cabinets as needed.
www.novastar.tech
MX6000 LED Display Controller User Manual
49
Advertisement
Table of Contents
