Set Hdr; Communication - NovaStar MX6000 Pro User Manual

5.3.4 Set HDR

Select Input from the main menu to access the input source list.
Select an input source to open the parameter settings.
Navigate to the HDR10 tab.
Figure 5-9 HDR10
Select Format and then select Auto, HDR10, HLG, or Close from the pop-up dialog box.
For HDR10, please set the relevant parameters.

PQ Mode: The mapping method of video source brightness.
−
ST2084 (PQ): This mode 1:1 maps the brightness of the video source. The part that exceeds the maximum
screen brightness will still be displayed as the maximum brightness.
−
ST2086 (Linear mapping): This mode linearly maps the brightness of the video source. It globally adjust the
video source brightness according to the maximum screen brightness to ensure that the ratio of the
brightness of the entire source content remains unchanged.

Max CLL Override: Enable or disable Max CLL override.

Max CLL: The max content light level.

5.4 Communication

Select Communication from the main menu to access the settings interface.
www.novastar.tech
MX6000 LED Display Controller User Manual
61