Table of Contents
Advertisement
4
Setting up the instrument
Fig. 2
4.2.2 Position of the cable duct
Warning
• The cable of the RM CoolClamp must be routed to prevent possible severing of the cable when
operating the microtome. For this purpose, attach the cable holder to the microtome and then
insert the cable into the cable duct.
2
1
Fig. 3
4.2.3 Potential pinching areas
Warning
• It is possible for fingers to become pinched in the specimen holder in the event of improper
handling.
10
1
• Ventilation openings, outlet
• Ventilation openings, inlet
2
Cable holder position:
• 20 cm high
(→ "Fig. 3-1")
• 6 cm lateral
(→ "Fig. 3-2")
(→ "Fig. 2-1")
(→ "Fig. 2-2")
Version 1.2, Revision C
Advertisement
Table of Contents
