Table of Contents
Advertisement
Ordering Information for Optional Accessories, Consumables and Spare Parts
Fig. 50
Fig. 51
Warning
The LED illumination must be operated at the power supply voltage specified on the nameplate (on the
underside of the adapter).
9.1.9 Cyanoacrylate adhesive
9.1.10 Foot switch
Fig. 52
Leica VT1200 / Leica VT1200 S
5
Module LED Hi-Power spots, 2-arm
• The module LED Hi-Power spots with 2-arm is
installed after the magnifier has been installed in
the magnifier holder and then connected to the
module Hi-Power spot, LED 1000.
Order No. ..................................14 6000 04826
Module Hi-Power spot, LED 1000
• Serves as a light source for the module LED Hi-
Power spots, 2-arm.
Order No. ..................................14 6000 04825
Single-component adhesive for adhering
specimens to the specimen plate – contains 10 gr.
Order No. ..................................14 0371 27414
Insert the foot switch into the uppermost socket
marked
FS
(→ Fig. 52-5)
basic instrument.
• The foot switch performs the
function.
Order No. ..................................14 0481 43397
9
on the left side of the
START/STOP
59
Advertisement
Table of Contents
