Eaton Power Xpert 9395P-1100/1100 Installation And Operation Manual page 87

UPS System Installation
mounting on the ISBM section. Install the conduit plate and install all conduit runs into the plate. Pull wiring
through conduit into the ISBM section wiring area.
Bottom Access Wiring. Remove the bottom conduit plate from the inside bottom of the ISBM section.
Identify all conduit requirements and mark their location. Drill and punch all conduit holes in the bottom
conduit plate prior to mounting on the ISBM section. Install the conduit plate and install all conduit runs
into the plate. Pull wiring through conduit into the ISBM section wiring area.
Eaton ® Power Xpert ® 9395P-1200 Installation and Operation Manual 164000500—Rev 11 69