Eaton Power Xpert 9395P-1100/1100 Installation And Operation Manual page 67

NOTE The ISBM and UPM sections are shipped with debris shields covering the ventilation
grills on top of the sections (see
installation is complete.
4. Remove the protective covering from the cabinets.
5. Remove the packing material, and discard or recycle in a responsible manner.
6. Inspect the contents for any evidence of physical damage, and compare each item with the Bill of Lading.
If damage has occurred or shortages are evident, contact an Eaton service representative immediately to
determine the extent of the damage and its impact on further installation.
NOTE While waiting for installation, protect the unpacked cabinets from moisture, dust, and
other harmful contaminants. Failure to store and protect the UPS properly may void your
warranty.
Figure 15. UPS Cabinet as Shipped on Pallet (ISBM Section)
Figure
Eaton ® Power Xpert ® 9395P-1200 Installation and Operation Manual 164000500—Rev 11
UPS Installation Plan and Unpacking
31). Do not remove the debris shields until
49