Device Presets Menu; Info Menu - Lightware MMX6x2-HT200 User Manual

5.4.7. Device Presets menu

The matrix has 4 user programmable presets. Each preset stores the full configuration of
the matrix. All presets are stored in a non-volatile memory; the matrix keeps presets even
in the case of power down. This is the same as using the backup-restore feature of
Lightware Device Controller software (see section
settings are stored in the matrix.
The list of the stored parameters and values can be found in section
Run a preset
Step 1. Navigate to Device Presets / Run Preset submenu and
Step 2. Press the enter  button to activate the Run Preset
Step 3. Press the enter  button to run the Preset. The
Save a preset
Step 1. Navigate to Device Presets / Save Preset submenu
Step 2. Press the enter  button to activate the Save Preset
Step 3. Press the enter  button to save the Preset. The
Delete a preset
Step 1. Navigate to Device Presets / Delete Preset submenu
Step 2. Press the enter  button to activate the Delete Preset
Step 3. Press the enter  button to delete the Preset. The

5.4.8. Info menu

The Info menu displays basic information: the serial number and part number of the matrix;
details about the firmware of the CPU and other controllers.
Section 5. Installation and operation
press the enter  button.
submenu. Use the up ▲ and down ▼ buttons to
toggle between the preset memories.
configuration is restored.
and press the enter  button.
submenu. Use the up ▲ and down ▼ buttons to
toggle between the preset memories.
configuration is stored.
and press the enter  button.
submenu. Use the up ▲ and down ▼ buttons to
toggle between the preset memories.
preset memory is erased.
6.10 on page 64), but in this case, the
10.3 on page 114.
¹Device Presets
»Run Preset
¹Run Preset:
P1:1 preset
¹Device Presets
½Save Preset
¹Save Preset:
P1:1 preset
¹Device Presets
¼Delete Presetº
¹Delete Preset:
P1:1 preset
MMX6x2-HT
User's Manual
º
»
º
»
»
Page 43 / 119