Configurable Inputs/Outputs; Configurable Inputs - Pilz PSEN sc L 3.0 08-12 Series Operating Manual

Wiring
7.3

Configurable inputs/outputs

When using the 8-pin connection, the configurable input/output at PIN 1 can be used for the
following functions:
}
Warning output
}
Muting lamp
}
Dynamic activation of the muting state
When using the 12-pin connection, the configurable inputs/outputs at PIN 7, 9, 10 and 11
can be used for the following functions:
}
Warning output
}
Alarms 1 or 2
} Muting lamp
}
Dynamic activation of the muting state
The inputs/outputs at PIN 9 and 10 can be used as an OSSD pair.
}
For PINs that you do not use as outputs, select No function. Therefore, the configurable
inputs/outputs are free for the configuration as inputs.
7.4

Configurable inputs

Note:
}
PINs you have already used as an output are no longer available in the configuration of
the inputs.
}
When using the 8-pin connection, the configurable inputs at PIN 3 and 4 can be used for
the following functions:
– Restart
– Reset
– Restart or reset
– Zone set switching
– Muting 1 and 2
– Dynamic activation of the muting state
Operating Manual PSEN sc L 3.0/5.5 08-12
1005056-EN-06
If the safety laser scanner is in an error state, a reset is performed,
If the safety laser scanner is not in an error state, a restart is performed
| 66