Psenscan Configurator; Basics; Installation; System Requirements - Pilz PSEN sc L 3.0 08-12 Series Operating Manual

PSENscan Configurator

9 PSENscan Configurator
9.1

Basics

The PSENscan Configurator is a graphic tool
}
For configuration of the safety laser scanners of the PSEN sc L 3.0/5.5 08-12 series,
} For incorporation of the safety laser scanner into a network,
}
For monitoring the safety laser scanners in the network,
}
For creating reports,
}
For management of passwords on the safety laser scanner PSEN sc L 3.0/5.5 08-12
series,
The safety laser scanner cannot be configured via the network. The configuration can only
be downloaded via a point-to-point connection.
9.2

Installation

9.2.1

System requirements

Operating system:
Processor:
RAM:
Available hard drive space:
Graphics card:
To view the documentation:
Interfaces:
Access rights:
Operating Manual PSEN sc L 3.0/5.5 08-12
1005056-EN-06
Windows 7, 10 or XP (32 Bit and 64 Bit)
Pentium 4, 2 GHz
3 GHz recommended
min. 2 GB
approx. 70 MB
Min. 1024 x 768 pixel resolution, 65536 col-
ours
For optimum performance of the system, a
current graphics card with 3D acceleration
should be used, and the 3D acceleration
should be activated.
Adobe Acrobat Reader, from Version 7.1.0
A free 100 Mbps Ethernet interface for data
transfer to the safety laser scanner
Network access for PSENscan Configur-
ator, profile Private
| 82