Overview; Device Features - Pilz PSEN sc L 3.0 08-12 Series Operating Manual

Overview

2 Overview
2.1

Device features

Safety laser scanners of the PSEN sc L 3.0/5.5 08-12 series constitute electrosensitive pro-
tective equipment (ESPE type: 3) in accordance with EN 61496-3 for workspaces in which
machines, robots, and automated systems might pose a physical danger to their operators.
}
Configurations are created with the PSENscan Configurator:
– With teach-in function when creating zones.
– Support for several zone sets for a difference at exactly two points.
} Detection capability: 30 mm, 40 mm, 50 mm, 70 mm, 150 mm
}
Connection
– With 8-pin M12 connector on supply voltage and evaluation device or
– With 12-pin M12 connector on supply voltage and evaluation device
Max. number
OSSD pairs
Configurable inputs
Configurable inputs/outputs
Zone sets
}
LED display and display for status information
} Scan angle: 275°
}
Infrared laser beams build up a 2-dimensional protected area
} Separation of the protected area in a safety zone and a warning zone
}
Enhanced availability by configurable multiple evaluation
}
Muting (2 outputs, 2 inputs)
– Muting in one direction
– Muting in two directions
– Dynamic muting
}
Override
}
Transferable configuration by saving the configuration in an exchangeable memory mod-
ule
}
Protection against manipulation
When indicators for manipulation are detected the OSSDs switch to the OFF state.
}
Rest condition to save energy
}
The safety laser scanner can be installed and operated overhead.
Operating Manual PSEN sc L 3.0/5.5 08-12
1005056-EN-06
Connection to
8-pin male connector
1
2
1
3
12-pin male connector
2
1
4
10
| 9