Wiring
– Two connections each for the supply voltage by the master unit and the functional
6.4
Configurable inputs/outputs
When using the 8-pin connection, configurable input/output at PIN 1 can be used for the fol-
lowing functions:
}
Warning output
}
Muting lamp
When using the 12-pin connection, the configurable inputs/outputs at PIN 7, 9, 10 and 11
can be used for the following functions:
}
Warning output
}
Alarms 1 or 2
}
Muting lamp
The inputs/outputs at PIN 9 and 10 can be used as OSSD pair.
}
For PINs that you do not use as outputs, select No function. Therefore, the configurable
inputs/outputs are free for the configuration as inputs.
6.5
Configurable inputs
Please note:
}
PINs you have already used as an output are no longer available in the configuration of
the inputs.
}
When using the 8-pin connection, the configurable inputs at PIN 3 and 4 can be used for
the following functions:
– Restart
– Reset
– Restart or reset
– Zone set switching
– Muting 1 and 2
– Dynamic activation of the muting state
}
When using the 12-pin connection, the configurable input at PIN 3 can be used for the fol-
lowing functions:
– Restart
– Reset
– Restart or reset
– EDM
– Zone set switching
– Muting 1 and 2
– Dynamic activation of the muting state
Operating Manual PSEN sc M 3.0/5.5 08-12
1005055-EN-03
earth
| 57