Example For A 8-Pin Connection - Pilz PSEN sc L 3.0 08-12 Series Operating Manual

First commissioning
}
Inputs
– Manual restart
– Activation EDM
– Muting (per sensor one pin)
– Dynamic activation muting
– Activation override
– Override mode = Edge or signal
For simultaneous monitoring of several zones and the switching of monitoring of zone sets,
the configurable inputs of the safety laser scanner must be configured appropriately.
}
Configuration of a static zone set
No configurable inputs are required.
}
Configuration of two zone sets
Configure two configurable inputs.
10.3.1

Example for a 8-pin connection

Sample settings in the PSENscan Configurator for a safety laser scanner with 8‑pin con-
nection: Vertical application with reference outline monitoring, 1 zone set, 1 warning zone,
automatic restart, dynamic muting in one direction, manipulation protection is active
Prerequisites
} The safety laser scanner is already connected to the 8-pin male connector.
Procedure:
1. From the start page, select Create new configuration.
The Device selection window is displayed with a tab for Online and Overview of all
types.
2. Select the connected device from Overview of all types. Double-click the device.
The device is displayed in the work window and it can be configured.
3. Under Application, select the application VERTICAL and 8-pin connection.
Configuration
You can enter a title for the configuration under Name Configuration.
You can enter the name of the person who created the configuration under Author.
You can describe the configuration in detail under Description.
The Configurator Version is entered by the system and cannot be changed.
The Check sum is entered by the system and cannot be changed.
The Creation date is entered by the system and cannot be changed.
Operating Manual PSEN sc L 3.0/5.5 08-12
1005056-EN-06
| 88