Testing With The Hand-Held Controller - Agilent Technologies 1200 Series User Manual

5 Troubleshooting and Error Handling
Insert Plate
A plate must be installed in the transport position of the Automation Interface.
N O T E
Eject Plate
A plate must be installed in the high performance autosampler.
N O T E
Open Door
Close Door
Test Barcode Reader
The Reset button resets the Automation Interface to its initial state.

Testing with the Hand-Held Controller

The Automation Interface Tests screen (see
selection of commands that allow you to test or adjust the Automation
Interface.
90
Opens the door and transfers the plate from the
Automation Interface into the sampler.
Opens the door and transfers the plate from the
sampler into the Automation Interface.
Opens the door.
Closes the door.
Reads the barcode on the plate on the Automation
Interface transport and displays the result in the field.
Agilent 1200 Series Sample Capacity Extension User Manual
Figure 56) gives access to a