Agilent Technologies 1200 Series User Manual page 36

2 Installation
Figure 25
The barcode reader has two pairs of mounting screws: one pair towards the
front of the reader, and one pair towards the rear. The mounting plate has two
mounting positions: one towards the front, and one towards the rear.
Installing the Barcode Reader in Portrait Position
1 Remove the front pair of mounting screws from the barcode reader.
Leave the rear mounting screws in place to prevent dust entering the barcode reader.
N O T E
2 Mount the barcode reader on the front position of the mounting plate, as in
30
Rack Well-plate
Extension Handler
Barcodes on the sides of the plates
Figure 26.
Automation
Interface
Agilent 1200 Series Sample Capacity Extension User Manual
Barcode reader in landscape position
Plate location A1
Barcode