Electrical; Barcodes - Agilent Technologies 1200 Series User Manual

1 Overview

Electrical

G2255A Well-plate Handler
Power Input
Line Voltage
Line Frequency
Fuses
Grounding
Computer Interface
Microprocessor Board
G2254A Automation Interface
Line Voltage
Interfaces

Barcodes

Supported barcode types
Line thickness
Maximum width
Protecting foil
Positioning
14
100-120/200-240V AC, 50/60 Hz (autosensing), 45 watts maximum
100-120/200-240V AC, autosensing
50/60 Hz
For 120V operation:
One 1.5-A, 0.25 in. x 1.25 in.
(0.64 cm. x 3.2 cm.)
For 240V operation:
Two 1.0-A, 0.2 in. x 0.08 in. (5.2-mm x 20-mm).
Through the power cord
RS-232 serial (double shielding required)
80C188 microprocessor-based; 1 reversible DC motor; RS-232
communications link; 2 stepper motors; 4 sensors; Auxiliary 15 pin D
Connector: 1 stepper motor, 2 - 12V outputs, 3 sensors
CAN DC in, 24V
CAN to any Agilent 1200 Series LC module
Code 39, Code 128, Codabar, 2 of 5 Interleaved
Between 0.19 and 1 mm
60 mm
Allowed
For end-mounted barcodes, the top edge of the bars must be 9 mm or
more above the bottom edge of the plate.
Agilent 1200 Series Sample Capacity Extension User Manual