Agilent Technologies 1200 Series User Manual page 29

Figure 17
11 Slide the cover/fuse block assembly back into the power entry port housing.
Seating the Well-plate Handler on its Locating Plate
The Well-plate Handler weighs approximately 32 pounds (14.53 kg) and should be
WA R N I N G
lifted with care. Take the proper precautions to avoid injury.
Four white-tipped locating pins on the Well-plate Handler locating plate are
designed to fit into holes on the underside of the Well-plate Handler.
• If you have just one Agilent 1200 Series module below the sampler, you can
• If you have two 140-mm-high modules below the sampler, you need to place
Agilent 1200 Series Sample Capacity Extension User Manual
Fuse-block assembly
Snap the cover/fuse block assembly securely into place.
place the Well-plate Handler directly on the pins on the locating plate.
four 30-mm spacers on the locating plate before placing the Well-plate
Handler on the spacer pins (see
Fuse block
Cover
Jumper bar
Figure 18).
Installation 2
Fuses
23