Agilent Technologies 1200 Series User Manual page 70

4 Working with the Sample Capacity Extension
At least one rack must be marked as the Input rack, and at least one must be
marked as the Output rack. If you mark four input racks and one output rack,
the first free input rack becomes an output rack, and so on.
Hypersequence Subdirectory
You use the Hypersequence Subdirectory group to specify where the datafile
subdirectories of the individual sequences are stored.
By default, the Hypersequence subdirectory is blank, and the datafiles are
stored in the subdirectories specified in the Datafile Subdirectories group. You
type the name of the hypersequence subdirectory in the corresponding text
box. If the subdirectory does not exist, it will be created automatically when
the hypersequence is started.
Datafile Subdirectories
You use the Datafile Subdirectories group to specify where the datafiles in the
individual sequences of the hypersequence are stored. If you choose use
subdirectory names from sequences, the datafiles are stored in the subdirectory as
specified in the Subdirectory field in the Data File group of the Sequence
Parameters dialog box.
If you choose use prefix/counter for subdirectory names, you can specify a prefix
and a counter that is incremented for each sequence in the hypersequence.
This option overrides the subdirectory naming in the Sequence Parameters
dialog box.
Hypersequence Output
In the Hypersequence Output group, you specify the reports that will be
produced. In addition to the printed report and the report to the screen, you
can also choose to save reports in HTML format (with a standard naming
convention using the hypersequence name) and/or in text format, where you
can specify the name of the report.
Comment
You can add a free-text comment for the hypersequence in this field.
70 Agilent 1200 Series Sample Capacity Extension User Manual