Site Preparation; Bench Space Requirements - Agilent Technologies 1200 Series User Manual

2 Installation

Site Preparation

Bench Space Requirements

N O T E
10
The Well-plate Handler should be assembled in its permanent position on a
sturdy lab bench with at least three electrical outlets nearby. It is easier to
assemble the Well-plate Handler and align it with the well-plate device if you
unplug and remove the Automation Interface from the laboratory bench first
(take note of the location of any cables connected to the device).
The bench top must be sturdy enough to support the weight of the computer, the Well-plate
Handler, and the Agilent 1200 Series system without sagging. An uneven surface will result
in the misalignment of the Automation Interface and Well-plate Handler.
G2257A
G2257A with optional Rack Extension
G2257A including Agilent 1200 Series LC system
G2257A with optional Rack Extension & incl. Agilent 1200 Series LC system
No additional gases, water or exhaust are required for the G2257A.
Size (H × W × D
Weight
Size (H × W × D
Size (H × W × D
Size (H × W × D
Agilent 1200 Series Sample Capacity Extension User Manual
)
49 cm × 47 cm × 72 cm
18 kg
)
49 cm × 73 cm × 72 cm
)
49 cm × 84 cm × 72 cm
)
49 cm × 110 cm × 72 cm