Agilent Technologies 1200 Series User Manual page 91

Figure 56
Insert Plate
A plate must be installed in the transport position of the Automation Interface.
N O T E
Eject Plate
A plate must be installed in the high performance autosampler.
N O T E
Open Door
Close Door
Test Barcode Reader
Barcode Adjustment On Switches the fixed barcode reader to continuous mode,
Barcode Adjustment Off Switches OFF continuous mode on the fixed barcode
Agilent 1200 Series Sample Capacity Extension User Manual
Automation Interface Tests screen
Opens the door and transfers the plate from the
Automation Interface into the sampler.
Opens the door and transfers the plate from the
sampler into the Automation Interface.
Opens the door.
Closes the door.
Reads the barcode on the plate on the Automation
Interface transport and displays the result in the field.
to allow you to adjust its position.
reader.
Troubleshooting and Error Handling 5
91