The Hypersequence Table - Agilent Technologies 1200 Series User Manual

4 Working with the Sample Capacity Extension

The Hypersequence Table

The Hypersequence Table allows you to specify the sequences that are to be
included in the hypersequence. To display the Hypersequence Table, you select
Hypersequence from the Sequence menu of the Method and Run Control and select
Hypersequence Table from the sub-menu.
You can compile the table either manually, using the table editing buttons, or
automatically, using the hand-held barcode reader.
• If you make the table manually, the hypersequence follows the order of the
The plates must be placed in the rack in the same order as in the table, i.e. the top plate in
N O T E
Input Rack 1 is the top plate in the hypersequence table.
• If you make the table using the hand-held barcode reader, the order of the
If you use the hand-held barcode reader to set up your hypersequence, you can change the
N O T E
order of the plates in the rack, or insert new plates, while the hypersequence is running.
The Hypersequence Table contains five columns (see
72
line numbers in the table.
plates in the rack defines the order in which the sequences in the
hypersequence are run.
Agilent 1200 Series Sample Capacity Extension User Manual
Figure 43).