Automation Interface Test; Testing With The Chemstation - Agilent Technologies 1200 Series User Manual

Automation Interface Test

Each movement of the Automation Interface can be carried out under manual
control. This is useful during troubleshooting where close observation of each
of the steps is required to confirm a specific failure mode or verify successful
completion of a repair. Each step command consists of a series of individual
commands which move the components to predefined positions enabling the
specific step to be done.

Testing with the ChemStation

In the Agilent ChemStation, the Automation Interface test is carried out using
the Automation Interface Test dialog box (see
Figure 55
Agilent 1200 Series Sample Capacity Extension User Manual
Automation Interface Test dialog box
Troubleshooting and Error Handling
Figure 55).
5
89