Agilent Technologies 1200 Series User Manual page 86

5 Troubleshooting and Error Handling
GoToRotary
FindPlate
PutOntoAI
Multi-Step Functions
GetPlate From
A plate must be installed in the specified rack.
N O T E
.
RemovePlate To
A plate must be installed in the transport position of the Automation Interface.
N O T E
The Reset button resets the Well-plate Handler to its initial state.
86
Moves the Well-plate Handler arm to the specified rack
position.
You select the rack position from the drop-down list.
Moves the Well-plate Handler arm down until it
encounters a plate.
There must be a plate in the position specified in
GoToRotary.
Transfers a plate to the Automation Interface.
You use this command after GoToRotary, FindPlate
and CloseGrip.
Transfers a plate from the specified rack to the
Automation Interface.
You select the rack position from the drop-down list.
Transfers a plate from the Automation Interface to the
specified rack.
You select the rack position from the drop-down list
Agilent 1200 Series Sample Capacity Extension User Manual