Display Rip Graceful-Restart; Display Rip Interface - H3C S6550X-HI Series Command Reference Manual

Field
interface summary
nexthop
RIP-interface
imported

display rip graceful-restart

Use
display rip graceful-restart
Syntax
display rip [ process-id ] graceful-restart
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id
argument, the command displays the GR status for all RIP processes.
Examples
# Display the GR status for RIP process 1.
<Sysname> display rip 1 graceful-restart
RIP process: 1
Graceful Restart capability
Current GR state
Graceful Restart period
Graceful Restart remaining time : 0
Table 3 Command output
Field
Graceful Restart capability
Current GR state
Graceful Restart period

display rip interface

Use
display rip interface
Syntax
display rip process-id interface [ interface-type interface-number ]
Description
Indicates that the route is a RIP interface summary route.
Address of the next hop.
Direct route on a RIP-enabled interface.
Indicates that the route is redistributed from another routing protocol.
: Specifies a RIP process by its ID in the range of 1 to 65535. If you do not specify this
to display RIP interface information for a RIP process.
to display the GR status for a RIP process.
: Enabled
: Normal
: 60 seconds
seconds
Description
Indicates whether GR is enabled: Enabled or Disabled.
GR state:
•
Under GR—GR is in progress.
•
Normal—No GR is in progress or GR has completed.
GR interval.
7