Display Route-Static Routing-Table - H3C S6550X-HI Series Command Reference Manual

Field
localAddr
TunnelCnt
Vrf
TunnelID
Topology
Weight
Flags
SRPolicyNID
SRInterface
ColorWeight
Locator
OrigLinkID
RealLinkID

display route-static routing-table

Use
display route-static routing-table
Syntax
display route-static routing-table [ vpn-instance vpn-instance-name ]
[ ip-address { mask-length | mask } ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name
case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, the command
displays static routing table information for the public network.
ip-address
this argument, the command displays all static routing table information.
mask-length
: Specifies the destination IP address in dotted decimal notation. If you do not specify
: Specifies the mask length, an integer in the range of 0 to 32.
Description
Local interface address.
Number of tunnels after route recursion.
VPN instance name. For the public network, this field displays
default-vrf.
ID of the tunnel after route recursion.
Topology name. The topology name for the public network is
base.
ECMP route weight. This field displays 0 for non-ECMP
routes.
Flags of the detailed next hop.
This field is not supported in the current software version.
NIB ID of the route obtained from an SR-MPLS TE policy
through route recursion.
This field is not supported in the current software version.
Output interface of the route obtained from the SR-MPLS TE
policy through route recursion.
This field is not supported in the current software version.
Weight value of the color attribute in the SR-MPLS TE policy.
IPv6 prefix of the locator to which the SID belongs.
If no locator is available, this field displays N/A.
Original link ID of the SDWAN TTE connection.
Real link ID of the SDWAN TTE connection.
to display static routing table information.
: Specifies an MPLS L3VPN instance by its name, a
6