Display Ip Routing-Table - H3C S6550X-HI Series Command Reference Manual

Field
dest-port
src-port:
flow-label
Path selected
Related commands
ip load-sharing mode

display ip routing-table

Use
display ip routing-table
Syntax
display
vpn-instance-name ] [ verbose ]
display ip routing-table all-routes
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all-vpn-instance
vpn-instance vpn-instance-name
case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, the command
displays routing table information for the public network.
all-routes
verbose : Displays detailed routing table information, including information about both active and
inactive routes. If you do not specify this keyword, the command displays only brief information about
active routes.
Examples
# Display brief information about active routes in the routing table.
<Sysname> display ip routing-table
Destinations : 12
Destination/Mask
0.0.0.0/32
1.1.1.0/24
127.0.0.0/8
127.0.0.0/32
Description
Destination port number.
Source port number.
IPv6 packet flow label.
Selected path information, including the IPv4 or IPv6 address of the
next hop and the egress port.
ip routing-table
: Specifies all VPN instances.
: Displays routing table information for the public network and all VPN instances.
Routes : 12
Proto Pre
Direct 0
Static 60
Static 60
Direct 0
Direct 0
to display routing table information.
[ all-vpn-instance
: Specifies an MPLS L3VPN instance by its name, a
Cost NextHop
0 127.0.0.1
0 192.168.47.4
0 192.168.47.4
0 127.0.0.1
0 127.0.0.1
6
| vpn-instance
Interface
InLoop0
Vlan12
Vlan13
InLoop0
InLoop0