Dscp - H3C S6550X-HI Series Command Reference Manual

Field
Cost
Tag
Flags
Sec
# Display routing statistics for RIP process 1.
<Sysname> display rip 1 route statistics
Peer
1.1.1.1
Local
Total
Table 7 Command output
Field
Peer
Optimal
Aging
Permanent
Garbage
Local
Total

dscp

Use to set the DSCP value for outgoing RIP packets.
dscp
Use
undo dscp
Syntax
dscp dscp-value
undo dscp
Default
The DSCP value for outgoing RIP packets is 48.
Views
RIP view
Predefined user roles
network-admin
Parameters
dscp-value
Optimal/Aging
1/1
2/0
3/1
Description
IP address of a neighbor.
Total number of optimal routes.
Total number of aging routes.
Total number of routes that never age out.
Total number of routes in the Garbage-collection state.
Total number of locally generated direct routes.
Total number of routes learned from all RIP neighbors.
to restore the default.
: Specifies the DSCP value in the range of 0 to 63.
Description
RealNexthop field displays the recursive next hop for the
route. Otherwise, the field is blank.
Cost of the route.
Route tag.
Route state.
Remaining time of the timer corresponding to the route
state.
Optimal/Permanent
0/0
0/0
0/0
12
Garbage
0
0
0