Sip-Server - H3C S6550X-HI Series Command Reference Manual

Views
User view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name
case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command
clears DHCPv6 server statistics for the public network.
Examples
# Clear DHCPv6 server statistics.
<Sysname> reset ipv6 dhcp server statistics
Related commands
display ipv6 dhcp server statistics

sip-server

Use
sip-server
address pool.
Use undo sip-server
Syntax
sip-server { address ipv6-address | domain-name domain-name }
undo sip-server { address ipv6-address | domain-name domain-name }
Default
No SIP server address or domain name is specified.
Views
DHCPv6 address pool view
DHCPv6 option group view
Predefined user roles
network-admin
Parameters
address ipv6-address
domain-name domain-name
string of 1 to 50 characters.
Usage guidelines
You can specify up to eight SIP server addresses and eight SIP server domain names in an address
pool. A SIP server that is specified earlier has a higher preference.
Examples
# Specify the SIP server address 2:2::4 in DHCPv6 address pool 1.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] sip-server address 2:2::4
to specify the IPv6 address or domain name of a SIP server in the DHCPv6
to remove a SIP server.
: Specifies the IPv6 address of a SIP server.
: Specifies the domain name of a SIP server, a case-insensitive
: Specifies an MPLS L3VPN instance by its name, a
46