Rip Version - H3C S6550X-HI Series Command Reference Manual

<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] rip summary-address 10.0.0.0 255.255.255.0
Related commands
summary

rip version

Use
rip version
Use
undo rip version
Syntax
rip version { 1 | 2 [ broadcast | multicast ] }
undo rip version
Default
No RIP version is configured on an interface. The interface can send RIPv1 broadcasts, and receive
RIPv1 broadcasts and unicasts, and RIPv2 broadcasts, multicasts, and unicasts.
Views
Interface view
Predefined user roles
network-admin
Parameters
: Specifies the RIP version as RIPv1.
1
: Specifies the RIP version as RIPv2.
2
[ broadcast | multicast ]
(default).
Usage guidelines
If an interface has no RIP version configured, it uses the global RIP version. Otherwise, it uses the
RIP version configured on it.
An interface running RIPv1 can perform the following operations:
•
Sends RIPv1 broadcast messages.
•
Receives RIPv1 broadcast and unicast messages.
An interface running RIPv2 in broadcast mode can perform the following operations:
•
Sends RIPv2 broadcast messages.
•
Receives RIPv1 broadcast and unicast messages, and RIPv2 broadcast, multicast, and unicast
messages.
An interface running RIPv2 in multicast mode can perform the following operations:
•
Sends RIPv2 multicast messages.
•
Receives RIPv2 broadcast, multicast, and unicast messages.
Examples
# Configure RIPv2 in broadcast mode on VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
to specify a RIP version on an interface.
to restore the default.
: Sends RIPv2 messages in broadcast mode or multicast mode
37