Safran WR-Z16 User Manual page 58

4.4 CLI Configuration
5.
6.
48
Figure 4-9: wrz_config interface. Interface parameters to change
Do not forget to <Save> the changes once the configuration is done. The
following message will prompt. To load this configuration at next reboot
the default
Figure 4-10: wrz_config interface. File in which to save the new applied configuration
Select Exit or press <Esc> to return to the command line.
filename (.config)
CHAPTER
must be
•
4 WR-Z16 User Manual Rev. v5.0
used.