Rsyslog Template To Improve Remote Login; Warranty - Safran WR-Z16 User Manual

3. Write
ing.safrangroup.com. Describe the issue found going into details.
a. What was the device's main activity before the error occurred? (e.g.
b. Were any relevant actions previously performed on the device before
c. Is the issue reproducible? Does it happen after specific actions are
d. Attach the device's log dump if it was possible to retrieve on step 1.
4. Our Support Team will open a case (find it on the replies' email subject) in
order to find out the possible causes on the issue and will give guidance so
it can be solved.
9.2.6

Rsyslog template to improve remote login

Logging in the WRZ-OS is managed by the rsyslog daemon, which is in charge of
both storing the events happened in the WRZ-OS in the internal /var/log/xxx
files and sending them to a centralized rsyslog server.
In order to get rsyslog daemon sending all logs to a server, /etc/rsyslog.conf
should be configured with the following lines:
module(load="imfile")
input
File="/var/log/systemlog"
Tag="custom"
Facility="local0"
Severity="info")
local0.* @<rsyslog server1 IP>
local0.* @<rsyslog server2 IP>
9.2.7

Warranty

The WR-Z16 device is fully factory tested and warranted against manufacturing
defects for a period of one year. Failure of the WRZ device due to installation
WR-Z16 User Manual
to our Support
the device was acting as a GM taking PPS/10MHz references from
another one and running as a PTP master on interface wr0).
the issue happened? (e.g. upgrading firmware or applying any spe-
cific configuration)
applied to the device or when a series of particular events happen in
it?
Team at TimingSupport@nav- tim-
APPENDIX
(type="imfile"
159