Connecting On Windows; Logging In From Uart - Safran WR-Z16 User Manual

3.2 Connecting to the Device
specific steps and can directly follow instructions detailed in "Logging from SSH"
on page 21.
3.2.5

Connecting on Windows

3.2.5.1

Logging in from UART

The connection to the UART in the WR-Z16 Model can be made by using Putty,
the SSH and Telnet client for Windows, as it supports serial connections too.
When having connected the RJ45-RS232-USB cable to the Windows PC, a new
serial port identified by COM<number> at the Device Manager, as can be
checked in the figure below.
Figure 3-1: Device manager. New serial port detected.
Afterwards, the connection can be made through Putty. The connection type
should be marked as Serial at <1>.The serial port name COM<number> should be
placed at <2>, and the port speed (115200 Bd) at <3> (see below).
CHAPTER •
24 3 WR-Z16 User Manual Rev. v5.0