Safran WR-Z16 User Manual page 90

5.4 IEEE 1588-2008 (PTPv2)
Power Utility Profile: IEEE 61850-9-3
This profile has been created to target Power Utility applications .
OID
19.xx13.x
19.xx13.9
19.xx13.10
19.xx13.14
19.xx13.11
19.xx13.20
19.xx13.21
19.xx13.23
19.xx13.24
Default Profile
This profile has default settings.
OID
19.xx13.x
19.xx13.9
19.xx13.10
19.xx13.14
19.xx13.11
19.xx13.20
19.xx13.21
80
Name Default Value
net/<iface>/1/cfg
Transport Protocol Layer 2
(IEEE802.3)
Delay Mechanism P2P
Domain 0
Transport Mode Multicast
Announce Rate 1
Sync Rate 1
Peer Delay req 1
Rate
PTP Timescale PTP
Default
Name
Value
net/<iface>/1/cfg
Transport UDP/IPv4
Protocol
Delay Mech- E2E
anism
Domain 0
Transport Multicast
Mode
Announce 1
Rate
Sync Rate 8
Range
Min Max
- -
- -
0 255
- -
- -
- -
- -
Range
Min Max
Layer 2 UDP/IPv4
E2E P2P
0 255
Multicast Hybrid
1/128 16
1/128 128
CHAPTER
5
Note
Only Layer 2 is
allowed
Only P2P allowed
Only Multicast
allowed.
Only 1 packet/s
allowed
Only 1 packet/s
allowed
Only 1 packet/s
allowed
Note
IP address must be set
before setting transport
protocol to UDP/IPv4.
Multicast Unicast and
Hybrid modes are
allowed.
•
WR-Z16 User Manual Rev. v5.0