Table of Contents
Advertisement
Figure 7-1:
The logging sub-tree is located under Misc. section and contains the following
parameters:
13.2000.1
13.2000.2
13.2000.3
13.2000.4
13.2000.5
13.2000.6
Logging can also be configured via the Web GUI. Navigate to Management >
Logging (see image below).
CHAPTER
•
7
WR-Z16 User Manual Rev. v5.0
Logging configuration parameters through CLI.
OID
Name
Server IP
Server port
Protocol
Verbose all
Log autosave
Log N rotate
Value Type
<IP address>
IP address from the remote logging
(i.e.,
server.
192.168.1.5)
<Integer> (i.e.,
Port information from the remote logging
514)
server.
<Enum>
Communication protocol for remote log-
• UDP
ging between the device and the server.
• TCP
<Enum>
High verbosity logging configuration for
• Disabled
modules and log information.
• Enabled
<Enum>
Automatic permanent logging backup in
• Disabled
the directory /root/.log with a periodicity
• Enabled
of 6 hours in case of power cuts.
<Integer> (i.e.,
Number of logdumps rotations stored in
5)
the device.
7.1 Syslog
Description
113
Advertisement
Table of Contents
