6.3 TACACS+
Figure 6-3:
Figure 6-4:
102
SSH connection with the WR-Z16 board
tac_plus output with debug information
Caution:
When TACACS and RADIUS work and have been con-
figured on the same client device, be careful with the order of the
configuration lines in /etc/pam.d/sshd. The TACACS configuration
line must be added always in first place and after it, the RADIUS con-
figuration line. This is because when the RADIUS configuration is the
first line, authentication of the first password always goes to the
CHAPTER
•
6
WR-Z16 User Manual Rev. v5.0