Table of Contents
Advertisement
2.5 Safety Notes
DANGER!
The FAN modules must only be replaced by a skilled person. Once
reinstated, its screw must be tightened up using a flat-blade screw-
driver with at least 0.8Nm to avoid any manual manipulation.
DANGER!
Replacement of a power supply module has been intended only for
occasional use by a skilled person. Hazardous energy inside the
device might be accessible when a module is extracted. Do not make
any kind of contact with any part inside the unit.
DANGER!
Installation of this product must be located in restricted access areas
where only skilled persons are authorized. This product is not to be
installed by the user/operator. Installation of the equipment must
comply with local and national electrical codes.
DANGER!
This equipment must be earth grounded. Never defeat the ground
connector or operate the equipment in the absence of a suitably
installed earth ground connection. Contact the appropriate electrical
inspection authority or an electrician if you are uncertain that suit-
able grounding is available.
Caution:
To increase the lifetime of your device it is recommended
to use it in a controlled temperature environment and limit to the
ambient
condition:
Temperature: -10°C ~ +50°C; Humidity; 0% ~ 90% RH
Note:
The use of dust covers is recommended for the unused
SFP/SFP+ slots.
CHAPTER
•
16
2
WR-Z16 User Manual Rev. v5.0
Advertisement
Table of Contents
