Cli Monitoring; Listing Parameters - Safran WR-Z16 User Manual

4.5

CLI Monitoring

The gpa_ctrl command tool can be used to monitor the current value and state
of all the parameters in the WRZ-OS.
4.5.1

Listing parameters

If the user directly executes gpa_ctrl without any arguments, it will list all the
parameters of the WRZ-OS. Then, by specifying some arguments and options
the user can slightly modify its usage.
gpa_ctrl [OPTIONS] [<module_name> [<path> [<write_val>]]]
The figure below illustrates the usage of gpa_ctrl to monitor all parameters cor-
responding to the power supplies by executing the command: gpa_ctrl hald
pws/
Figure 4-11:
The list of related parameters displays in 5 columns:
CHAPTER •
4 WR-Z16 User Manual Rev. v5.0
Note:
Verify network configuration after reboot: Network configuration
changes are only applied at startup. Thus, it is recommended to
reboot the device to verify that the IP settings has been properly
updated using the typical ifconfig <ifname> command or through
gpa_ctrl tool.
Example of gpa_ctrl usage to list power supplies parameters.
4.5 CLI Monitoring
49