Using Web Interface - Safran WR-Z16 User Manual

8.2 Firmware Update
But not the one that correspond to another device:
Or the one that corresponds to another hardware version
8.2.2

Using Web interface

Once the web GUI of the device has been properly opened (See
the Device" on
146
wr-zynq-os-v<XXX>-<YYYMMDD>-Z16x.x_binaries.tar
wr-zynq-os-v<XXX>-<YYYMMDD>-Z164.x_binaries.tar
wr-zynq-os-v<XXX> -<YYYMMDD>-Z16_binaries.tar
wr-zynq-os-v<XXX>-<YYYMMDD>-ZEN3.x_binaries.tar
wr-zynq-os-v<XXX>-<YYYMMDD>-Z162.x_binaries.tar
page 20), navigate to the Management > Firmware Update panel.
The corresponding firmware tar ball can be drag-n-dropped, or you can
Browse from the PC.
Then, press on Upload button and wait until checking the compatibility of
the given firmware. If the firmware is detected to be compatible it will auto-
matically start the upgrade procedure and reboot (twice) the device.
Please wait in this screen until the procedure completes.
Figure 8-5: Update Procedure Waiting screen.
If the uploaded version is lower than 5.0, a factory reset is mandatory. If this
is the case, a message will appear indicating this.
If an incompatibility (figure below) has been detected, the user should NOT
continue with the flashing procedure except if the support team has con-
firmed that this is the way to fix a specific problem.
CHAPTER •
8 WR-Z16 User Manual Rev. v5.0
"Connecting to