Safran WR-Z16 User Manual page 184

APPENDIX
The first step to configure the server is opening the UDP ports 1812 and 1813:
#ufw allow 1812/udp
Rules updated
Rules updated (v6)
The clients must be configured in /etc/freeradius/3.0/clients.conf by
adding their IPs with the "shared secret". For example, this can be done as fol-
lows:
client nashostname {
ipaddr = 172.17.5.13
secret = ourchosensecret
}
A subnet can be used as IP address too:
client mynasnetwork {
ipaddr = 172.17.5.0/24
secret = sevensecret
}
The
freeradius/3.0/users by using the following lines:
username Cleartext-Password := "userpassword"
[other-configs]
An example can be:
test-radius Cleartext-Password := "password"
174
configuration of
Note: If your WR-Z16 unit has been used as the client, the password
must be configured for the root user. Registration of new users is not
allowed in this device so root is the only existing user.
the users can be done in the file
WR-Z16 User Manual
/etc/-