Regulatory Compliance; Emc; Safety; Rohs - Safran WR-Z16 User Manual

2.7 Regulatory Compliance
3. Carefully lift the device and position the rear of the device between the
4. Align the mounting holes in the L bracket with the mounting holes in the
5. Secure the device using four 3/4-inch screws through the elongated holes
2.7

Regulatory Compliance

2.7.1

EMC

2.7.2

Safety

2.7.3

RoHS

18
equipment rack mounting posts and slide the device into the rack until the
L brackets on the sides of the device are flush with the equipment rack
front posts.
equipment rack posts.
in the L bracket and into the threaded holes in the mounting post (or the
clip-nuts or cage-nuts).
EN55032:2015
AC:2016
EN55035:2017
EN61000-3-2:2014
EN61000-3-3:2013
FCC: 47 CFR Part 15B (10–1–15 Edition)
ICES-003 Issue 6
IEC 62368-1:2014
AC:2015
A11:2017
2011/65/UE
2015/863/UE
CHAPTER •
2 WR-Z16 User Manual Rev. v5.0