Safran WR-Z16 User Manual page 73

needs a specific combination that mixes WR on some ports and PTP/IEEEE-1588
or NTP on others, he/she first select the Custom preset and then configure each
interface.
Custom Preset via the Web GUI
To configure a custom preset:
CHAPTER •
5 WR-Z16 User Manual Rev. v5.0
After logging in to the Web GUI, navigate to Configuration > Timing Gen-
1.
eral > Preset. Select Custom from the drop down menu.
2. You will be given a warning prompt to acknowledge that your current pre-
set settings (both Time Sources Configuration and Fanout Configuration)
will be deleted from the form:
3. Modify each Timing Source in the Timing Source Configuration panel in
the order they should be evaluated by the FOCA algorithm. If the Type field
is left DISABLED, it will not be evaluated.
The Timing Source Type options are DISABLED, WR, GM, and FR/HO. Selec-
tions in the Type field will determine available selections in the Name field.
If you need to reorder your entries, the Rank can be adjusted here as well.
To do so, use the blue rank-altering buttons for each timing source.
4. Modify each Fanout Source in the Fanout Configuration panel. The fanouts
are listed by order of interface name.
Set the Protocol field to determine the communication method used for
that interface. The Protocol field options are DISABLED, WR, PTP, and NTP.
If an interface is left as DISABLED, no timing information will be output by
5.2 General Timing Management
63