Logging In From Ssh - Safran WR-Z16 User Manual

baudrate is : 115200
parity is : none
databits are : 8
stopbits are : 1
escape is : C-a
local echo is : no
noinit is : no
noreset is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv -E
imap is :
omap is :
emap is : crcrlf,delbs,
Type [C-a] [C-h] to see available commands
Terminal ready
As a recommended alternative, Putty for Linux works properly. Programs like
minicom or screen can be used, although they are not fully recommended for
color compatibility issues.
3.2.4.2

Logging in from SSH

Ubuntu distributions (and many others) have already installed all ssh- related
tools necessary to connect to the device. The user does not need to perform any
CHAPTER •
3 WR-Z16 User Manual Rev. v5.0
Note: USB device discovery
The target device's name may vary depending on the names of other
devices. The dmesg | grep tty command can be used to discover
which name has been set to the connected device. This is an example
output:
[4.616728] cp210x 3-6.1.2:1.0: cp210x converter detected
[4.620195] usb 3-6.1.2: cp210x converter now attached to
ttyUSB0
In the case of the above output, /dev/ttyUSB0 would be the device's
name.
3.2 Connecting to the Device
23