Trap Configuration - Safran WR-Z16 User Manual

7.2.2.3

Trap configuration

The SNMP traps generated by the device can be configured using the traps sub-
tree under snmp.
13.3900.1
13.3900.2-5
13.3900.6
CHAPTER •
7 WR-Z16 User Manual Rev. v5.0
ModClose: Trap generated when a module or service is closed.
okagainParam: Trap generated when a parameter comes back to a correct
status after an alert condition.
warningParam: Trap generated when a parameter changes to a warning
status.
criticalParam: Trap generated when a parameter changes to a critical
status.
outofrangeParam: Trap generated when a parameter goes to an out of
range value.
TrackedParam: Trap generated when a tracked parameter changes its
value.
Note: Trap definition: An extended definition of the traps can be
found in the MIB file in /wr/etc/snmp/SEVEN-PRODUCT-MIB.txt
Note: Tracked parameters: A selection of parameters in the devices
have been performed and flagged like tracked parameters. These
parameters create an alert each time that their value is changed.
OID Name
Community
name
NMS IP 1-4
Start/shutdown
Value Type
<String> (i.e., public)
<IP address> (i.e., 192.168.1.5 or
192.168.1.0/24)
<Enum>
•
• Disabled
7.2 SNMP
Description
Name of the com-
munity.
Authentication
encryption pro-
tocolDestination NMS
IP address.
Enable/disable star-
tup and shutdown
Enabled
traps.
123