Safran WR-Z16 User Manual page 39

4.1.1 Table representation
For each specific feature explained through the user-guide, the following table
format will be employed to describe the corresponding parameters along with
their relevant attributes.
An example is given for the network interface where the same directory has been
separated into two tables to follow the same structure as the web GUI panels.
The following table corresponds to the parameters related to the configuration
of the network interface.
Table 4-1:
1.xxx0.x
0.xxx0.7
CHAPTER •
4 WR-Z16 User Manual Rev. v5.0
Visibility: Expert parameters are by default hidden unless toggling the
expert mode. Then, the disabled parameters are meaningless and thus tem-
porary hidden to improve legibility.
Status: Current status of a parameter.
Warning: The current value within a given situation corresponds to a
warning alert.
Critical: The current value within a given situation corresponds to a
critical alert.
Out-of-Sync: The current value could not be synchronized and is out-
dated.
Unlicensed: This parameter is invalid/unusable without the proper
license.
Unknown: The whole module that handles the parameter is down.
Events: Some relevant parameters are associated to events when they
change their value (Tracked) or when their value enters an alert range
(Warning, Critical) or a smart alert.
Note:
The list of all modules and corresponding parameters together with
the value of their attributes can be found in the WRZ-OS API guide.
Configuration parameters of the network interface.
OID Name
/net/<iface>/xxx
DHCP <Bool>
Value
Type
→ 201x, wr1 → 211x, ..., wr15 → 361x & eth0
Directory related to the <iface> name
→ 680x, eth1 → 690x.
where OIDs follow the given pattern: wr0
Enable/Disable the DHCP IPv4 discovery.
4.1 Parameters API Introduction
Description
29