Safran WR-Z16 User Manual page 117

iptables
iptables -A INPUT -i eth1 -j DROP
## Then save to local file so that this configuration is applied
at next reboot
iptables-save > /usr/local/etc/iptables.rules
CHAPTER •
6 WR-Z16 User Manual Rev. v5.0
- A INPUT - i
Note: It is not recommended to edit the iptable files without any
local access (UART) to the device as it is easy to make an error and
fully block the network access to this device. To revert the changes,
the user should perform a factory reset or delete the /us-
r/local/etc/iptables.rules files.
eth1 - s 192.168.7.1
6.5 Firewall
- j ACCEPT
107