Table of Contents
Advertisement
4.1 Parameters API Introduction
OID
0.xxx0.3
0.xxx0.4
0.xxx0.5
The next table corresponds to the parameters that provide information (read-
only) about the corresponding interface:
Table 4-2:
OID
1.xxx0.x
0.xxx0.1
0.xxx0.2
0.xxx0.8
0.xxx0.9
0.xxx0.10
0.xxx0.11
0.xxx0.12
0.xxx0.13
0.xxx0.14
30
Value
Name
Type
IPv4
<Array> [4
Address
x u8]
IPv4 Net-
<Array> [4
mask
x u8]
IPv4 Gate-
<Array> [4
way
x u8]
Information related to the network interface
Value
Name
Type
/net/<iface>/xxx
Status
<Enum>
0. Link
Down
1. Link Up
2. Not
Found
Ethernet
<Array> [6
Address
x u8]
Speed
<String>
Tx Packets
<Integer>
(u32)
Rx Packets
<Integer>
(u32)
Tx Bytes
<Integer>
(u32)
Rx Bytes
<Integer>
(u32
Tx Errors
<Integer>
(u32)
Rx Errors
<Integer>
(u32
Description
IPv4 address of <iface> (format: [0-255].[0-255].[0-
255].[0-255]).
Subnet mask.of <iface> (format: [0-255].[0-255].[0-
255].[0-255]).
Default gateway for <iface> (format: [0-255].[0-255].
[0-255].[0-255]).
Description
→ 201x, wr1 → 211x, ..., wr15 → 351x & eth0
Directory related to the <iface> name
→ 680x, eth1 → 690x.
where OIDs follow the given pattern: wr0
Status of the interface.
MAC address of the corresponding interface with
upper case hexadecimal format (e.g.,
64:FB:81:20:84:06).
Auto-negotiated speed of <iface>.
Transmitted packets on <iface>.
Received packets on <iface>.
Transmitted bytes on <iface>.
Received bytes on <iface>.
Transmission errors on <iface>.
Reception errors on <iface>.
CHAPTER
•
4
WR-Z16 User Manual Rev. v5.0
Advertisement
Table of Contents
