Table of Contents
Advertisement
5.4 IEEE 1588-2008 (PTPv2)
5.4.2
Configuration
The parameters associated to PTP are listed below:
OID
19.xx13.x
19.xx13.8
19.xx13.9
19.xx13.10
19.xx13.14
76
Note:
Master/Slave port configuration: The role of the port is given
by the Preset
("Presets" on
from the PTPv2 configuration tab. The section
should be read in case the user needs to modify the role for a specific
port.
Note:
PTP provides many options to support a wide range of applic-
ations. Then, the PTP profiles restrain some specific settings in order
to limit compatibility to only a subset of PTP. The user should thus
consider these restrictions when configuring PTP for a specific pro-
file.
Name
Value Type
net/<iface>/1/cfg
Profile
0. Default
1. Custom
2. Telecom
8265.1
3. C37.238-
2017 Power
4. 61850-9-
3 Power
Transport
5. Layer 2
Protocol
6. UDP/IPv4
Delay Mech-
0. E2E
anism
1. P2P
Domain
<Integer>
[0-255]
Default: 0
page 59) and cannot be modified directly
"Custom" on page 62
Description
Configuration of the corresponding
<iface> port instance
Profile selected (Default, telecom...) with a set of
options pre-configured.
Define the network layer that delivers the PTP
packets.
Path delay measuring mechanism used by the
PTP Port {E2E (End to End delay request-
response mechanism), P2P (Peer to Peer delay
mechanism) }.
Domain number associated to the PTP trans-
actions. Several domains can work sim-
ultaneously. PTP profiles can restrict the value of
domain number (i.e., 8275.1)
CHAPTER
•
5
.
WR-Z16 User Manual Rev. v5.0
Advertisement
Table of Contents
