Safran WR-Z16 User Manual page 82

5.3 White Rabbit
Figure 5-13:
The information shown in the advanced overview menu is explained in the fol-
lowing table:
1.xx10.x
1.xx10.6
1.xx10.5
1.xx10.5
1.xx10.5
1.xx31.xx
72
Advanced WR interface Overview (WR0 configured as slave)
Note: The clock information (clock quality & time properties) dis-
played in the expanded view above corresponds to the announced
messages received on this specific interface and not the transmitted
ones. This information is irrelevant (disabled) if the link is down or
when the connected peer is not sending any announce messages
(e.g., slave role).
OID Name
net/<wrX>/1/
PDet State
Ext State
Rx Sync ID
Peer VID
net/<wrX>/1/clk/Q/
Value Type
0. None
1. Waiting 1st Msg
2. Checking
3. Detected
4. Failure
0. Disabled
1. Active
2. PTP Only
<Integer> (u16)
<Integer> (u16)
CHAPTER
Description
Information of the cor-
responding WR port
tern: wr0 → 20xx, wr1 →
instance (wrX). (Where
21xx, ..., wr15 → 35xx)
OIDs follow the given pat-
State of the Protocol Detection.
State of the extension. If PTP
Only this means that the WR
extension has not been detec-
ted.
Receive Sync Sequence ID.
VLAN ID of the connected peer.
Clock Quality of the cor-
responding WR port
instance (wrX).
•
5 WR-Z16 User Manual Rev. v5.0