Table of Contents

Advertisement

5.8  Miscellaneous
OID
3.7220.2
5.8

Miscellaneous

This section, found by navigating to Configuration > Misc in the Web GUI, allows
to configure various settings that do not fit in any previous categories. The para-
meters can be seen below:
3.8010.x
3.8010.0
3.8010.0
3.8020.x
3.8020.1
94
Name
Trigger Origin
Note:
Holdover and FOCA: As mentioned above FOCA only
switches between timing source when a failure is detected. This
means that if the active timing source of a device is HO, it will stick to
it until reaching the expired states (Failure state of HO).
OID
Name
misc/cfg/xxx
Time Zone
PPS Mode
misc/info/xxx
Uptime
Value Type
<Enum>
Trigger origin of last one launched
• NONE
• MANUAL
• PPS_DRIFT
• TRACK_LOST
• LINKDOWN
• EXTCLK_DOWN
• EXTPSS_DOWN
• CLK_DRIFT
Value Type
Miscellaneous Timing con-
figuration.
<String>
Configure the device time zone such
that local time is properly displayed
(web interface, LCD screen).
• Always ON
Configurable mode to control the PPS
• Only Locked
output where:
• Legacy
- PPS is always output even if CRITICAL
(Always ON).
- PPS is only output if the active ref-
erence is locked.
- PPS follows the same behavior as in
the legacy release (wr-zynq-os-v2.x).
Miscellaneous Timing inform-
ation.
<Integer>
Time Manager uptime in seconds.
(u64)
CHAPTER
Description
Description
5
WR-Z16 User Manual Rev. v5.0

Advertisement

Table of Contents
loading

Table of Contents